![]()
Series ET offers Feed Control with Water Meter input.
The Series
ET provides feed control with input from a water
meter input. When the impulse count from the water meter reaches a
set value (either 1 or 10), the pump starts. The pump will continue
to run for an adjustable time period. The Series ET includes both
input and output water meter connections at the front panel.
The out-put connection provides an isolated volt free output of the
water meter contact to operate additional pumps or timers off the
same water meter.
- Isolated volt free contact (water meter)
- Mode select knob, stroke length, stroke rate
- Pump capacities from 0.8 litres/hour @17 bar to 79.5 litres/hour @ 1.3 bar
- Stroke rate and length adjust 0-100% with turndown ratio of 100 : 1
Degasing Head Assembly
The Degassing Head Assembly is now a standard option available on the majority of PULSAtron pump ranges. It is an effective solution to the problems often encountered with the dosage of oxidising chemicals such as sodium hypochlorite and chlorine dioxide.
Click on Degas for full details.
To view full specification details, click on the pump image.
Follow the links in the menu to select a suitable water meter, dosing tank and spares packs.
For a certificate of conformity, click on CE.

To select the correct Dosage Pump, you first need to understand how electromagnetic impulse pumps operate.
It is also important to appreciate the importance of "Turn Down Ratio" and the different methods of pump actuation and sizing.
To help you, we have produced a document explaining all the above. Click on Dosage Pumps to view.
Click on the links below to view other documentation which we hope you find useful.
Installation; to explain the important considerations to ensure you achieve an effective installation.
Water Meter; to explain how to ensure a Dosage Pump and Impulse Water Meter combination achieve the desired dosage rate.
Controller; to explain how to ensure a Dosage Pump and Controller combination achieve the desired dosage rate.
