MPT100 Series Controllers

There are many different combinations of basic controller and options available. The following summaries detail standard units and these will satisfy the vast majority of applications. However, a wide choice of upgrade kits is available for most of the Controllers. Therefore please contact us if you feel your requirement is not met by any of the units specified below or on pages detailing the other Series of Controllers.

Timed Systems - Cooling Towers

Click on the controller name to view a full specification sheet.

• MPT110AR1 is a series 100 PULSAtrol unit providing 28 day biocide dosage with up to 24 hour bleed lockout.
  
  
• MPT110ACR1 is a series 100 PULSAtrol unit providing a selectable timer and a 28 day biocide timer with up to 24 hour bleed lockout. The selectable timer can dose inhibitor or operate system blowdown on a timed basis or via an impulse water meter.
  
  
• Click Manual to view an Operating & Installation Manual for the above controllers.

MPT100 units are best suited for simple control requirements or to plug a gap in an existing control system.

Typically, select MPT100 units to dose an inhibitor on a timed basis or via an impulse water meter or to dose a single biocide via a 28-day timer.

Click on Installation to view a guide highlighting key considerations for the installer.