PrimeLab App

Apps for various applications, including photometer devices are very fashionable. But not every app is the same. The PrimeLab app is probably the most powerful and complete photometer tool  in its field.  Through wireless connection to PrimeLab photometer you can:

• Create accounts (measurement sources)screen2
• Confirm GPS coordinates
• Synchronize measurements and remotely
controlled measurements
• Calculate indices such as the Langelier
• Display measured journals and send them
via PDF or Excel file
• Test and set parameters and add new
parameters by entering a code to make
the PrimeLab more comprehensive
• Input your own water chemicals to create
dosing recommendations
• Free Cloud storage system

… is available and, when activated, can be consulted so that the measurement results automatically synchronize to and from any Android or iOS-based system (iOS as of May 2015).

Users such as public swimming pools, building service engineers, shipping companies, health departments, water companies and many others can view the field test results from their location at any time and immediately after the measurement.

The app is currently available in German, English, Spanish, French, Italian, Russian and Chinese for download.

In the PrimeLab itself, in the software “PrimeLab Desktop Assistant” and in the app, test results are assigned to “accounts”. Accounts can be set so that different locations of a public bath e.g. trainer pool, splash pool etc. have their results assigned to them.

Building service engineers would assign boiler 1, boiler 2 etc. so that they can track and report their results. An account always defines the measurement source. At the start of the measurement on the PrimeLab, whether directly or through the app or the software firstly an “Account” will be requested where the measurement is to be saved. These accounts can be created in the app, as well the PC software.

In the app, it is also possible to store a card module; the GPS coordinates for each account. If the account data measuring the volume of the source (e.g. 50m³ pool) is entered, this information is used for the calculation of dosing recommendations.

Click on an account to view the measurement results. These originate either from automatic synchronization with the PrimeLab when measurements were made with this without using the app as a remote control or by remote-controlled measurement of PrimeLab using the app or PC desktop assistant. The measurement results are set according to accounts and in chronological order. This can be filtered (date, parameters) and exported as an Excel file or as a PDF.

Also, the calculation factor can be triggered in this menu, an LSI (Langelier Saturation Index) and RSI (Rysnar Stability Index).
Test parameters not generated by the PrimeLab but necessary for the calculation of the indices values, such as temperature, conductivity, flow rate, etc. can be entered manually into the App and the desktop assistant software.

Click on “Dos Rec” In the result detail view, the user is prompted for the target value and receives on the basis of the measured value associated with the amount of water (stored under the relevant account) and the individual “Setup” stored water treatment chemicals, a dosing recommendation to the water parameters to set ideal conditions for your water based on the chemical you use.

Copyright © 2010 - 2017 Water Treatment Products Ltd, All rights reserved.

Designed and built by Big Eye Deers