Broad Spectrum Biocide

Price

Request price

Name

WTP CL102R

Description

WTP CL102R is a broad-spectrum biocide with activity against both gram-positive and gram-negative organisms. It is also highly effective against algae and fungi.

WTP CL102R is based upon a didecyl ammonium compound and will provide disinfection in contact with surfaces.

WTP CL102R functions over a wide range of pH, from 6.5 to 9.5.

Product Data 

Physical State	Red solution with slight aromatic odour
Density	0.95 – 0.99 g mL-1

Dosing

• WTP CL102R is intended to be applied using a fogging machine or spray on to pre-cleaned surfaces
• It is important to ensure maximum end-use concentrations for human contact and inhalation are not exceeded, solution strengths must therefore be produced accurately
• To make a fogging solution, add 10 mL WTP CL102R to 990 mL (i.e. a 1% solution) of clean mains water and mix thoroughly
• The fogging solution must contact and wet all surfaces, it must then be allowed to dry before the system is returned to surface
• It is advised that contact plates are taken before and after the cleaning process to ensure a reduction in bacterial levels has occurred

Application

Please refer to material safety data sheet for detailed handling/storage instructions.

Packaging

WTP CL102R is available in 10 litre and 25 litre non-returnable drums.

Service

Field representatives can work closely with customer personnel to assure the effective application of the water treatment programme.

More Information

To enquire further about this product click here.

The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The company shall not be held liable for any damage resulting from handling, contact, mis-use or mis-application of the above product. In all instances the user should satisfy themselves that this product is suitable for the anticipated application and should carry out suitable and sufficient risk/COSHH assessments and a method of use statement.