WTPH860 polymer /dispersant blend designed for prevention of hardness deposition in recirculating or once through cooling systems using moderate to high hardness make-up water. The product retards precipitation zones by dispersion.
Stabilises hardness salts in solution, prevents deposition zones. Low effective dosage makes WTP H860 economical for large water users.
|Physical state||Colourless liquid|
|Specific gravity (sg) @ 20oC||1.08|
|pH of 1% solution||5|
Dependant on level of hardness contamination. However, an average dosage would expect to maintain 100 to 150 ppm of WTPH860 within system for hardness levels up to 800 ppm.
Please refer to material safety data sheet for detailed handling/storage instructions.
WTPH860 treatments are shipped in 25 litre and 200 litre non-returnable drums.
Field Representatives will work closely with customer personnel to assure the effective application of the water treatment programme. Regular service calls can be provided by qualified personnel.
To enquire further about this product click here The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The company shall not be held liable for any damage resulting from handling, contact, mis-use or mis-application of the above product. In all instances the user should satisfy themselves that this product is suitable for the anticipated application and should carry out suitable and sufficient risk/COSHH assessments and a method of use statement.