Multipurpose Antifoam

Price

Request price

Name

WTPAF1510

Description

WTPAF1510 is a silicon based foam control agent suitable for most aqueous systems.

WTPAF1510 is an effective multipurpose antifoam and defoamer, with low toxicity and good environmental profile.

WTPAF1510 offers good foam suppression at low doses and is therefore cost effective in use.

Typical areas of use where WTPAF1510 may be successful include

  • Evaporative Cooling
  • Process waters
  • Effluent treatment

Silicon based antifoams should not be used in paint booths, and in some types of biological effluent treatment plant.

SPECIFICATIONS

Appearance White Liquid
pH 7-8
Silicone 10%
Total Solids 14%
Specific Gravity (SG) 1.03-1.05

Application

WTPAF1510 can be dosed manually as and when foam occurs or automatically using a standard dosing pump and tank set. Dosage will vary according to the application; typically shot doses should be made of 5 to 50 ppm, and continuous dosing of 0.2ppm to 10ppm using a suitably sized pump.

Handling

Avoid direct contact with skin and eyes. Refer to Safety Data Sheet for full safety data information.

Packaging

WTPAF1510 treatments are shipped in 25 litre and 205 litre non-returnable drums.

Service

More Information

To enquire further about this product click here. The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The company shall not be held liable for any damage resulting from handling, contact, mis-use or mis-application of the above product. In all instances the user should satisfy themselves that this product is suitable for the anticipated application and should carry out suitable and sufficient risk/COSHH assessments and a method of use statement.

Copyright © 2010 - 2017 Water Treatment Products Ltd, All rights reserved.

Designed and built by Big Eye Deers