Polyquat

Price

Request price

Name

WTP C52

Description

WTP C52 is a broad spectrum biocide against a wide range of micro-organisms including, algae, fungi, bacteria and yeast infestations in water systems.

WTP C52 is based on a low foaming polymeric quaternary ammonium organic compound.

ADVANTAGES

  • Effective against algal, fungal and bacterial species
  • Product functions well over a wide pH range of 6.5 to 9.5

 

PRODUCT DATA

Physical State Clear solution with slight alcohol odour
Density 0.95 –1.00 gml-1

TREATMENT AND FEEDING REQUIREMENTS

Heavily contaminated systems will require more biocide than a clean system. Draining, flushing, and mechanical cleaning of the cooling tower sump is recommended if biological contamination is severe.

Biocides should be added to the system in shock dosages at a point of good circulation. It is generally recognised that the alternate use of two biocides will control biological contamination better than any one biocide. Normally alternate use of generically different agents is suggested.

DOSING

  • Product is intended to be fed intermittently into the system.
  • When treating the system for the first time, add chemical in small increments to determine the extent of foaming due to detergent action.
  • Chemical may be poured into the sump of the cooling tower evaporative condenser.
  • The system should be cleaned before application of an initial dose of 150 ppm of system water.
  • Dose may vary depending on water temperature, cycles of concentration and seasonal requirement.
  • Typically weekly dosing will be required to visibly control microbiological growth.
  • Heavily contaminated systems will require higher biocide doses than clean systems.

Application

Use biocides safely. Always read the label and product information before use. Please refer to material safety data sheet for detailed handling/storage instructions.

Packaging

WTP C52 product is available in 25 litre and 205 litre non returnable drums.

Service

Field Representatives will work closely with customer personnel to assure the effective application of the water treatment programme. Regular service calls can be provided by qualified personnel.  

More Information

To enquire further about this product click here The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The company shall not be held liable for any damage resulting from handling, contact, mis-use or mis-application of the above product. In all instances the user should satisfy themselves that this product is suitable for the anticipated application and should carry out suitable and sufficient risk/COSHH assessments and a method of use statement.

Copyright © 2010 - 2017 Water Treatment Products Ltd, All rights reserved.

Designed and built by Big Eye Deers