Scale and Corrosion Inhibitor

Price

Request price

Name

WTPH515

Description

WTPH515 is based upon zinc / phosphate technology incorporating antiscalant additives and Zn stabilizing polymer. WTPH515 offers excellent corrosion control for soft to low hardness make up waters, together with a dispersant to reduce scale deposition in critical equipment. The product is also strongly acidic and is designed to aid pH control in cooling waters below pH 8.3 thus reducing scaling potential. 

Product Data

Physical State Pale brown liquid
Specific Gravity (SG) 1.12-1.13
pH <1

 

Application

  • WTPH515 is shot dosed at 400 ppm to system waters to provide initial passivation
  • However continuous proportional dosing, to make up water usage, offers the best corrosion control and cost effective application of product. (Dosage rates of 50-100ppm dependent upon system conditions would be recommended.)
  • Details of proportional dosing systems can be supplied by our representatives
  • A Zinc drop test kit is available to monitor chemical dosing (WTPTK110). Zn levels of 2 to 4 ppm will offer good corrosion control.
HANDLING  Please refer to material safety data sheet for detailed handling/storage instructions.
  • Avoid contact with eyes, skin and clothing.
  • In case of contact, immediately remove contaminated clothing and wash skin with soap and water.
  • For eyes, flush with plenty of water and seek medical attention. Harmful if swallowed. 

Packaging

WTPH515 treatments are shipped in 25 litre and 200 litre non-returnable drums.

Service

Field Representatives will work closely with customer personnel to assure the effective application of the water treatment programme. Regular service calls can be provided by qualified personnel.

More Information

If you wish to enquire about this product click here

The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The company shall not be held liable for any damage resulting from handling, contact, mis-use or mis-application of the above product. In all instances the user should satisfy themselves that this product is suitable for the anticipated application and should carry out suitable and sufficient risk/COSHH assessments and a method of use statement.

Copyright © 2010 - 2021 Water Treatment Products Ltd, All rights reserved.

Designed and built by Big Eye Deers