WTPDF515
DF515 is a polyalkylene glycol based foam control agent suitable for high temperature aqueous systems.
WTP DF 515 is an effective antifoam and defoamer at temperatures in
excess of 55 0 C.
WTP DF 515 offers good foam suppression at low doses and is therefore cost effective in use.
Typical areas of use where DF 515 may be successful include:
pH | 6.0 |
Specific gravity (sg) | 1.025 |
Flash point | >216 0 C |
Pour point | -36 0 C |
Cloud point | 51 0 C |
WTP DF515 can be dosed manually as and when foam occurs or automatically using a standard dosing pump and tank set.
Dosage will vary according to the application; typically shot doses should be made of 5 to 50 ppm, and continuous dosing of 0.2ppm to 10ppm using a suitably sized pump.
FDA ,21CFR ( Code of Federal Regulations) 173.310, 173,340, 175.105, 176.200, 176.210, 177.1200, 178.35120, 178.3570, 178.3190
Please refer to material safety data sheet for detailed handling/storage instructions.
DF515 Treatments are shipped in 25 litre and 205 litre non-returnable drums.
Field Representatives can work closely with customer personnel to assure the effective application of the water treatment programme. Regular service calls will be provided by qualified personnel.
To enquire further about this product click here
The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The company shall not be held liable for any damage resulting from handling, contact, mis-use or mis-application of the above product. In all instances the user should satisfy themselves that this product is suitable for the anticipated application and should carry out suitable and sufficient risk/COSHH assessments and a method of use statement.