WTP PAA5 is a fast acting non-foaming, non-tainting biocide based on Peracetic Acid.
WTP PAA5 is compliant under the Biocidal Products regulations (BPR) and the trade name is registered with the competent authorities as required by the 30th September 2017 submission date.
WTP PAA5 is supported under the following Product Types (PT) of the BPR;
• PT2: Disinfectants and algaecides not intended for direct application to humans or animals.
• PT3: Veterinary hygiene.
• PT4: Food and feed area.
• PT5: Drinking water.
For specific uses under these product types, please see dosing section.
WTP PAA5 is effective against a wide spectrum of nuisance microorganisms including:
• Aerobic and Anaerobic Bacteria
• Bacterial Spores
• Mould Yeasts
WTP PAA consists of a stabilized equilibrium mixture of Peracetic Acid, Water, Acetic Acid and Hydrogen Peroxide.
|PT||Use||Application||Active substance PAA||Dose rate as product|
|2||Disinfection of sewage and waste water||12ppm||240ppm|
|2||Disinfection of non-porous hard surfaces & equipment||Wiping, spraying, foaming, immersion||120-750ppm||2400-15000ppm|
|2||Disinfection of ultra-filtration and RO membranes||Soaking||450ppm||9000ppm|
|2||Disinfection of process water||120ppm||2400ppm|
|3||Multiple uses are covered||contact us for further information||contact us for further information|
|4||Disinfection of non-porous hard surfaces and equipment||Wiping, spraying, foaming, immersion||120-750ppm||2400-15000ppm|
|4||Disinfection of drinking water distribution systems||30-465ppm||600-9300ppm|
|5||Drinking water for animal||10-20ppm||200-400ppm|
WTP PAA breaks down into water, oxygen and acetic acid.
Use biocides safely. Always read the label and product information before use. WTP PAA undiluted is a powerful oxidising agent. It is heat sensitive above 60ºC – spontaneous decomposition may occur. Contact with brass, bronze, chromium, copper, iron, lead, manganese, nickel, silver, zinc and other catalytic metal will accelerate decomposition. Contact with concentrated acid, alkalis reducing agents, dirt, ash, rust or metal dust will also cause spontaneous decomposition. Therefore these materials must be absent in transfer pumps and pipework. (Please refer to Material Safety Data Sheets for detailed handling and storage information).
WTP PAA treatments are shipped in 25 litre vented drums.
Field Representatives will work closely with customer personnel to assure the effective application of the water treatment programme. Regular service calls can be provided by qualified personnel.
The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The company shall not be held liable for any damage resulting from handling, contact, mis-use or mis-application of the above product. In all instances the user should satisfy themselves that this product is suitable for the anticipated application and should carry out suitable and sufficient risk/COSHH assessments and a method of use statement.