WTPM27 Ph Buffer 5.1
WTP M27 Buffer pH5.1 is a pH buffering agent specially formulated, for use in, closed circuits, where upward pH drift has occurred.
pH drift can occur due to changes in makeup water quality or other factors whilst is it not common a simple adjustment with this product will normally provide long term buffering.
This pH buffer has been formulated to work in conjunction with WTPM27 and WTPM26
| Appearance | Colourless viscous liquid |
| Specific Gravity (SG) | 1.284 |
Measurement of system pH at various points of the system will ensure correct chemical balance is maintained using either a pH meter or strips. WTPTKC019 can be used to monitor pH level.
DOSAGE When the pH rises above the desired level add WTPM27 Buffer pH5.1 in increments and monitor pH closely. Careful consideration will be required for aluminium systems. HANDLING Please refer to material safety data sheet for detailed handling/storage instructions. Avoid prolonged contact. Not to be taken internally. Wash thoroughly with water, and for eyes seek medical attention.
WTPM27 Buffer pH5.1 treatments are shipped in 5 litre, 10 litre and 25 litre polythene drums.
To enquire further about this product click here.
The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The company shall not be held liable for any damage resulting from handling, contact, mis-use or mis-application of the above product. In all instances the user should satisfy themselves that this product is suitable for the anticipated application and should carry out suitable and sufficient risk/COSHH assessments and a method of use statement.