Prevent Carbonic and Oxygen Attack of Pipework


Request price




WTPS94 ACT is recommended for the direct injection to steam headers to prevent carbonic acid and oxygen attack of pipework and components in condensate systems. WTPS94 ACT forms a complete barrier film on the metal surfaces preventing corrosive attack. WTPS94 ACT is all organic in nature and does not contain amines and its components are approved under FDA and Dairy applications. The product is designed to be applied as part of a total boiler treatment programme.

Product Data

Physical state Light yellow liquid with mild odour
Density 1.03
pH 5.4-5.8

Treatment Requirements

The dosage varies based on the concentration of free carbon dioxide in the steam generated by the breakdown of feedwater M alkalinity.

Maximum product dose rate is 100 ppm.

Testing and Control

Field representatives will work closely with plant personnel to initiate and maintain effective control procedures.


WTP S94 ACT can be dosed to systems using manual dosing pots or metering pumps.


Please refer to material safety data sheet for detailed handling/storage instructions.

  • Avoid contact with eyes, skin and clothing.
  • In case of contact, immediately remove contaminated clothing and wash skin with soap and water.
  • For eyes, flush with plenty of water and seek medical attention.
  • Harmful if swallowed.
  • Do not leave exposed to atmosphere.
Avoid direct contact with skin and eyes. Please refer to Safety Data Sheets for detailed handling and storage information. Do not allow to freeze.  


WTPS94 ACT treatments are shipped in 25 litre and 200 litre non-returnable drums. Shelf life – 6 months.


Field Representatives will work closely with customer personnel to assure the effective application of the water treatment programme. Regular service calls can be provided by qualified personnel.

More Information

To enquire further about this product click here

The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The company shall not be held liable for any damage resulting from handling, contact, mis-use or mis-application of the above product. In all instances the user should satisfy themselves that this product is suitable for the anticipated application and should carry out suitable and sufficient risk/COSHH assessments and a method of use statement.

Copyright © 2010 - 2021 Water Treatment Products Ltd, All rights reserved.

Designed and built by Big Eye Deers