WTP SS1295 is a solid, economical, multi-functional boiler water treatment recommended for the complete control of softened boiler feedwater. WTP SS1295 will control residual calcium hardness found in the feedwater or from condensate, adjust hydroxide levels for correct chemical balance, and eliminate dissolved oxygen to prevent pitting corrosion. WTP SS1295 contains a lignosulphonate to aid dispersion.
WTP SS1295 dosage is proportional to the oxygen content of the feedwater and should be dosed to achieve acceptable pH and sulphite reserves.
Boiler sulphite range 30 to 70 mg/l
The following formulation can be used as a guide:-
Product gms per m3 feed = (16 x ppm Oxygen) + (55)/Boiler Concentration Factor
ppm oxygen can be determined from the graph of temperature vs ppm O2 in BS2486.
Your representative will work closely with plant personnel to establish the correct regime for analysis.
Please refer to Safety Data Sheets for detailed handling and storage information.
WTP SS1295 treatments are shipped in 6kg non-returnable HDPE jars.
Field representatives will work closely with customer personnel to assure the effective application of the water treatment programme. Regular service calls can be provided by qualified personnel.
The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The company shall not be held liable for any damage resulting from handling, contact, mis-use or mis-application of the above product. In all instances the user should satisfy themselves that this product is suitable for the anticipated application and should carry out suitable and sufficient risk/COSHH assessments and a method of use statement.