WTPCW12.5
WTPCW12.5 contains sodium nitrite, buffers and a copper corrosion inhibitor. It is a very effective corrosion inhibitor for modern air conditioning chilled water systems, closed loop cooling systems and hot water heating boilers.
WTPCW12.5 is compatible with alcohol and glycol anti-freezes. It is a complete, easily applied single-solution treatment which provides economical waterside protection for mixed metal systems containing copper, brass and ferrous based metals.
Physical state | Pale yellow liquid |
Specific gravity (sg) @ 20oC | 1.10-1.12 |
Recommended normal concentration level is 800 – 1200ppm of nitrite. A drop test kit is available to determine correct levels in the system (WTPTK106).
DOSING WTPCW12.5 is dosed at 1% of the system volume (i.e. 10 litres WTPCW12.5 per cubic meter of water in the system). FEEDING WTPCW12.5 is usually added to closed systems by the use of a pot feeder or by a manually operated chemical injection pump. Handling Please refer to material safety data sheet for detailed handling/storage instructions.
WTPCW12.5 treatments are shipped in 25 litre non-returnable drums.
To enquire further about this product click here
The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The company shall not be held liable for any damage resulting from handling, contact, mis-use or mis-application of the above product. In all instances the user should satisfy themselves that this product is suitable for the anticipated application and should carry out suitable and sufficient risk/COSHH assessments and a method of use statement.