WTP C745 - Pseudokill
WTP C745 has biocidal effectiveness over a broad spectrum of water-borne bacteria including:
Physical State | Pale yellow liquid |
Density | 1.05-1.10 g ml-1 |
pH | 10-11 |
WTP C745 effective dosage will vary depending upon system cleanliness. Dirty systems or badly contaminated systems will require more frequent and/or higher dosage rates.
Typically clean systems will require a WTP C745 dose of between 250 – 500 ppm. For biocide washes or biocide flushing dose at 500 ppm.
Use biocides safely. Always read the label and product information before use. Please refer to safety data sheet for detailed handling/storage instructions.
WTP C745 treatments are shipped in 25 litre and 200 litre non-returnable drums.
Field Representatives will work closely with customer personnel to assure the effective application of the water treatment programme. Regular service calls can be provided by qualified personnel.
To enquire further about this product click here
The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The company shall not be held liable for any damage resulting from handling, contact, mis-use or mis-application of the above product. In all instances the user should satisfy themselves that this product is suitable for the anticipated application and should carry out suitable and sufficient risk/COSHH assessments and a method of use statement.