Isothiazalone
Price
Name
WTP C32
Test Kit
Description
WTP C32 is an industrial biocide for the preservation of water and other liquids in open cooling systems (i.e. evaporative cooling towers) and processing systems (both open and closed recirculating type systems) by the control of harmful organisms.
WTP C32 is approved under the Biocidal Products Regulations No 528/2012 (BPR) for Product Type 11 application.
Authorisation Number: UK-2019-1196
Advantages
WTP C32 controls a wide range of harmful bacteria:
- Legionella pneumophila
- Desulfovibrio desulfuricans
- Shewanella oneidensis
- Desulfovibrio vulgaris
- Shewanella putrefaciens
- Enterobacter cloacae
- Pseudomonas aeruginosa
- Klebsiella pneumoniae
- Pseudomonas fluorescens
- Serratia marcescens
- Enterobacter aerogenes
- Escherichia coli
- Serratia plymuthica
- Pseudomonas stutzeri
Product Data
| Physical State | Colourless liquid |
| Density | 1.025 g ml-1 +/- 0.02 |
| pH | 3 – 4 (concentrate) |
Application
Application Methods
- Manual dosing - Product to be decanted from the drum or IBC using a drum tap into a measuring jug or cylinder and poured into the system.
- Automatic dosing - Product is to be dosed directly from the drum or IBC, and decanted into either on-site day tanks or chemical dosing pots and pumped into the system.
Application rate and Frequency
Initial dosage of 500 mL of product m3 of water. Open cooling systems (i.e. evaporative cooling towers)- Typical dosing for a clean system (preventative use): 200 of product per m3 of water at 3 hour contact time.
- Contaminated system (curative use): 500-2000ml of product per m3 of water at 24 hour contact time.
- Dose weekly as a minimum (adjust dose based on dipslide results)
- Typical dosing for a clean system (preventative use): 200 of product m3 of water at 1 hour contact time.
- Contaminated system (curative use): 500-2000ml of product per m3 of water at 24 hour contact time.
- Dose quarterly (adjust dose based on dipslide results)
Testing
- Test with dipslides to ensure TVC’s are in an acceptable range (<104)
- A drop test kit is available (WTP TK123) to determine correct levels in the system.
Packaging
WTP C32 treatments are shipped in 25 litre and 200 litre non-returnable drums.
Service
Field representatives will work closely with customer personnel to assure the effective application of the water treatment programme. Regular service calls can be provided by qualified personnel.
More Information
To enquire further about this product click here
The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The company shall not be held liable for any damage resulting from handling, contact, mis-use or mis-application of the above product. In all instances the user should satisfy themselves that this product is suitable for the anticipated application and should carry out suitable and sufficient risk/COSHH assessments and a method of use statement.
